
Two charging checks before paying a deposit
Ask for clear photos of every charging inlet on the actual car and the charging pages from the owner’s manual for its original market. Get a separate answer for home or workplace AC charging and public DC fast charging. For each, write down the car’s inlet standard and the cable or connector at a place where you will actually charge. A listing that says “fast charging” gives you neither of those details.
The original sales market matters more than the country where the vehicle was built. A Chinese brand can sell a domestic version and an officially exported version of the same model with different inlets. A brochure for the model in your country is helpful when it matches the car. For a private import, ask the manufacturer or seller to give the charging specification for the specific VIN or factory configuration.
GB/T, Type 2 and CCS2
GB/T is a prefix used for Chinese national standards. For passenger EV charging, look for the exact reference. GB/T 20234.2-2015 covers the AC coupler. GB/T 20234.3-2023 covers a DC coupler. A seller saying “GB/T charging” may be describing the car’s AC inlet, its DC inlet or both. Ask them to identify each one. Some cars group both inlets behind one flap, while others put them in different locations.
In the European system, Type 2 is the common AC connector. CCS2, also called Combo 2, is the associated DC fast-charging connector. A CCS2 vehicle inlet has a Type 2 portion above two larger DC contacts. On a car with a combined inlet and Type 2 AC support, the AC cable uses the upper portion only. A stand-alone Type 2 inlet can also have a similar upper shape. Open every protective cap during the visual check so you can tell whether the separate DC contacts are present.
Shape is a clue. Check the wording in the manual or on the vehicle as well. A Type 2 cable can look familiar next to a GB/T AC inlet, and their shapes can be confused in a small photo. Even on DC equipment with the correct-looking connector, the charger and car need compatible communication. Cross-check the exact connector standard with the charger operator before relying on a session.
Photos and documents from the same car
Ask the seller for a wide photo showing where each flap is on the car, followed by a straight-on view of the complete inlet with its caps open. Include any label around the inlet. Useful Chinese terms include 交流充电 for AC charging, 直流充电 for DC charging and 充电口 for charging inlet. A photograph of a loose cable or of the charger at the dealership does little to identify the inlet on the car.
Compare those photos with the relevant manual pages. BYD Europe, for example, lists a DC charging connector as CCS2 in its European ATTO 3 specification sheet. That sheet helps identify the version it describes. If a seller offers a mainland-market car with a similar name, ask for the manual or build record for that car and repeat the photo check. Use the VIN to tie the documents to the vehicle. A basic VIN result can help identify the model, while the actual inlet, documentation and a charging session establish compatibility.
AC charging at home or work
Ask what connector is attached to the charger or which cable a socketed charger requires. A public AC station with only a socket may require a cable you bring yourself. At home, record your charge point model and have the installer confirm the exact car, cable or equipment combination. The inlet standard and the vehicle’s on-board AC charging limit are separate fields. The kW printed on the station is its rating. The car, station and installation together determine the power you can use.
If a seller says “it works at home”, ask which equipment they used and whether it is included. A video from another country can show the car accepting a charge there without answering whether that setup works with your electrical installation. If your plans depend on charging overnight, check support and expected speed at your regular parking location before paying a deposit.
DC fast charging on routes you use
Look up at least one station near home and one on a route you drive regularly. Open the listing for the specific site and look at the connectors on the relevant posts. A network may list different connectors at different locations. Send the operator the inlet standard and equipment details if the app only shows the station’s maximum power or an image of a connector.
For example, suppose the car’s manual confirms GB/T DC and the stations on your regular route list CCS2 only. Record that route as having no confirmed direct DC option for this car. Separately check your regular AC option. A working overnight charge may be enough for daily trips. If fast charging matters for longer trips, ask the seller, automaker and charger operator for a supported setup before planning around it.
Adapter claims and a charging demonstration
If the seller offers an adapter or a modified inlet, ask for the exact part and the documentation showing support for the vehicle, charging mode and equipment involved. Check the manufacturer and station operator’s policies before use. Have a qualified technician inspect a modified inlet. A promise that a connector fits leaves open electrical compatibility, communication and whether the station operator permits the equipment.
Agree on a demonstration for the actual car and the equipment you expect to use. With the seller present, begin a normal charging session following the manufacturer’s instructions. Check that the station and the car both show energy delivery, and that the session ends normally. If you depend on both AC and DC, check each mode separately. Record the station, cable or adapter model and the charging mode. Keep that record next to the seller’s written specification so you know which setup was demonstrated at handover.